MYC-SAM9X35 核心板
概述
MYC-SAM9X35 核心板是深圳市米尔科技有限公司推出,基于 ATMEL AT91SAM9X35 处理器的 ARM9 核心板,该款产品属于 MYC-SAM9X5 系列核心板中的一款。
MYC-SAM9X35 核心板正面图:
图1 MYC-SAM9X35 核心板
MYC-SAM9X35 核心板背面图:
图2 MYC-SAM9X35 核心板背面图
关于 MYC-SAM9X35 核心板软硬件资源,请查看 MYC-SAM9X5 系列核心板 中的详细介绍。
Chip Introduction
A highly-integrated 400 MHz ARM926 embedded MPU, featuring a rich set of connectivity and user interface peripherals, including Ethernet MAC and dual CAN. The graphics LCD controller features 4-layer overlay and 2D acceleration (picture-in-picture, alpha-blending, scaling, rotation, color conversion), and a 10-bit ADC that supports 4- or 5-wire resistive touchscreen panels. Additional interfaces include a soft modem supporting exclusively the Conexant SmartDAA line driver, HS USB Device and Host, FS USB Host, two HS SDCard/SDIO/MMC interfaces, USARTs, SPIs, I2S and TWIs. A multi-layer bus matrix associated with 2 x 8 central DMA channels as well as dedicated DMAs support the high-speed connectivity. The External Bus Interface incorporates controllers for 8-bank DDR2/LPDDR, SDRAM/LPSDRAM, static memories, and specific circuitry for MLC/SLC NAND Flash with integrated ECC. The SAM9X35 is available in a 217-ball BGA package with 0.8mm ball pitch.
CPU Logic Diagram
Key parameters for SAM9X35
Parameter |
Value |
Flash(Kbytes) |
0 |
Pin Count |
217 |
Max. Operating Frequency |
400 MHz |
CPU |
ARM926 |
Hardware QTouch Acquisition |
No |
Max I/O Pins |
105 |
Ext Interrupts |
105 |
USB Transceiver |
3 |
Quadrature Decoder channels |
0 |
USB Speed |
Hi-Speed |
USB Interface |
Host, Device |
SPI |
2 |
TWI (I2C) |
3 |
UART |
7 |
CAN |
2 |
LIN |
4 |
SSC |
1 |
Ethernet |
1 |
SD/eMMC |
2 |
Segment LCD |
0 |
Graphic LCD |
Yes |
Video Decoder |
No |
ADC channels |
12 |
ADC Resolution (bits) |
10 |
ADC Speed (ksps) |
440 |
Analog Comparators |
0 |
Resistive Touch Screen |
Yes |
DAC Channels |
0 |
DAC Resolution (bits) |
0 |
Temp. Sensor |
No |
Crypto Engine |
NO |
SRAM (Kbytes) |
32 |
EEPROM (Bytes) |
0 |
Self Program Memory |
No |
External Bus Interface |
1 |
DRAM Memory |
DDR2/LPDDR, SDRAM/LPSDR |
NAND Interface |
Yes |
picoPower |
No |
Temp. Range (deg C) |
-40 to 85 |
I/O Supply Class |
1.8/3.3 |
Operating Voltage (Vcc) |
0.9 to 1.1 |
FPU |
No |
MPU / MMU |
No/Yes |
Timers |
6 |
Output Compare channels |
6 |
Input Capture Channels |
6 |
PWM Channels |
4 |
32kHz RTC |
Yes |
Calibrated RC Oscillator |
No |